Seo Contents Research Tool © – it is Finally Here & it Works!
Seo Contents Research Tool is any Webmaster’s dream! – developing unlimited new original text for any purpose in just a few clicks. One of the most exciting things about this Auto-Content technology is how it easily transforms a tedious and time consuming task into a quick, easy, and even enjoyable one. In the following review you’ll learn how this innovative technique can dramatically increase your Site(s) incoming traffic.
Some background
The idea is quite simple yet a clever one – Seo Contents Research Tool is based on a smart engine that automatically researches the Internet for existing information based on keyword(s) that you provide, it then stores what it find as most relevant to your topic. The entire data is collected into a central small database; it is then being automatically split and organized into logical subgroups. Now comes the fun part where all you got to do is to easily construct yourself new readable article(s) that can be quickly added to your website(s) or blog(s).
Important benefits
Such solution brings several clear advantages:
* Enables you to quickly prepare attractive and converting sales pages.
* Takes no more than just a few clicks to get the job done.
* Getting more incoming traffic much faster.
* Significantly reduces the time and effort spent on tedious proofreading and editing tasks.
* No need to spend hundreds anymore while relying on external providers.
On the bottom line
Thanks to Seo Contents Research Tool you can dramatically increase your inbound traffic and conversion rates, simply because any successful on-line business or WebMarketing campaign constantly needs high-quality WebContent and much of it. By the end of this quick review the best advice would be to watch it in action and experience how it easily takes any on-line business to the next level. There are plenty other great benefits provided by this technology simply because it offers so many important opportunities for webmasters.
Dan Kazinsky
http://www.articlesbase.com/article-marketing-articles/seo-contents-research-tool–it-is-finally-here-it-works-688037.html
3 Comments to “Seo Contents Research Tool © – it is Finally Here & it Works!”
Leave a Reply
System programming nightmare!…?
Prepare for a MEGA question that I’m sure 99.9% of people cannot dream of answering. But, I’m fresh out of ideas…
I’m totally stumped. I’m doing some research on system development. It’s a "academic" venture at this point, but what I learn here will guide me in planning a serious project in the future. This is NOT intended to be a desktop operating system like Windows or Linux. Instead, it will be a light-weight micro-kernel and series of drivers/components for a prototype "secret thing" I’m building.
I know how to do all of the kernel and driver programming in C. The problem is I’ve been in user-land application programming nearly all my life. Now I’m in ring 0, with 1:1 control over the machinery. It’s a totally different world! What’s got me snagged is the freakin bootloader!
This system IS targeting 32-bit x86 processors, so I’m able to test on Virtual PC and other emulators. It will work fine if the boot process goes off a floppy disk with a FAT12 FS. But the target for the real system won’t allow floppy disks. So this process has to be done from ISO 9660 or comparable CD/DVD image format. The way it must work is similar to the way you boot Windows or Linux for the first time off a CD/ISO image:
The hierarchy will be like this:
[ISO 9660 Image]
1) 512b Bootsector:
a) bootloader.bin
2) Root File Dir
a) krnlloader.sys
b) AKERNEL.exe (32-bit PE)
c) …other supporting files in other directories, etc…
Essentially, the bootloader will be a 2-stage boot. I’ve gotten stage 1 (bootloader.bin) to work fine. I wrote it in ASM and there is no problem with it. Stage 1, of course, starts in x86′s 16-bit RealMode and may only take up 512b. This is why Stage 2 is needed. It will make the switch to 32-bit PMode and invoke the kernel. The kernel in turn handles everything else. If I can just get the kernel booted, I will be fine. I’m totally comfortable with C and unhindered physical memory manipulation. I’ve already got a decent framework to piece the system kernel together and get everything going. I even have some basic pre-made drivers and some C++ runtime libraries I can throw in (yup, I wrote em and they work). But, this nasty boot process from ISO has totally stalled me out! It’s driving me mad! I have to master this or the project can’t move forward. Again, it WILL work fine with a floppy, but I CANNOT use a floppy any more. It MUST be a valid CD/DVD or virtual image, and the target of the system requires this.
Essentially, my problem could probably be summed up like so: I’m a n00b in x86 Intel ASM, lol. I have no idea how I can change my old bootloader code to now parse the stage 2 loader (krnlloader.sys) from the ISO image and invoke its entry point. I’ve been using the FAT12 file system thus far, which while fine for floppys, is not working now. I cannot figure out how memory is physically laid out in ISO format, and I believe it’s actually CONTIGUOUS, with each sector being 2KiB, as opposed to 512b. Allegedly, I also need to store the bootdrive value gathered from DL somewhere, and use it to start parsing the file contents. I just can’t figure out HOW.
The biggest problem is that no resources giving even a slight hint how to do this can be found. Nearly everything on the internet is about working on Linux/*Nix based operating systems and using obscure tools through command lines. I’m working on Windows and using Visual Studio and NASM. When I FINALLY (after many days) found information about working on Windows with VS, guess what? It was all about using floppy disks to boot the system, and NO information about ISO/CD/DVD!
Every search and question on forums has turned out fruitless. And now it’s just driving me insane!
I guess, I’m looking for a heroic, nerdy knight in silicon armor to rescue me from this nasty rut (in a totally non-gay way of course! LOL!). Answers have proven elusive and even non-existent. All the answers I’ve gotten so far are things I already know. If anyone has a clue about how to do this, PLEASE point me in the right direction. If you have never done this sort of work, save yourself some typing and me some reading. I’m only looking for answers from people who really know how to do this. I know this is 100% possible, it’s just a question of HOW.
Julie, no… The stage 1 bootloader itself IS on the ISO/CD. It boots just fine, and I can make it do whatever I want except parse stage 2 (which would be what actually loads the kernel) and execute it. The BIOS has a built in functionality to read CD/DVD. Otherwise, we’d never be able to install operating systems like Windows, Linux or Mac. Those can’t fit on floppies anyway.
It’s definitely possible through the BIOS. I just can’t find any information on properly parsing the contents of the ISO/CD memory and executing stage2. If I can execute stage 2, I can easily boot my kernel and finally get some abstraction and sanity back.
@ Paul:
No offense, but I could have done without such a silly and arrogant post. If your reading time is so valuable then it’s likely you shouldn’t spend time here on Y!A. :-/
As it is, I already develop multi-platform software FOR NT and *Nix based systems. I develop ON Windows because it is a superior operating system; despite Win32 being a bit filthy. There is no comparison between VS and the IDEs people are using on *Nix systems. Using command lines and scripts doesn’t make you "good" at development. It’s just an inconvenient hindrance to productivity. Otherwise, we can all trash our GUI based systems and go back to DOS-like days of old and binary punch-cards. Yeah, don’t think so… It’s very seldom that one should EVER need to use cmd prompts for *anything*.
This has nothing to do with being "MS-centric". It has everything to do with using the best platform and IDE available to do my work. I don’t buy this stuff for no reason, nor does the government, military, FBI, CIA, etc.
My first impression is that you would need to load a CD driver before you can load the kernel.
edit: You can probably find all you need in http://github.com/zeha/syslinux/blob/327c0dadf173e09348b967746925e995b2b6dfaf/core/isolinux.asm
References :
Honestly – I took a fast look over what you wrote and can see that it’s likely understandable by me. But it’s way too long. If my customers send me anything this long I charge them for reading it.
Anyway – you mentioned some windows software development tools. That puzzles me immensely. If you have some objection to using linux/unix type OS to do your development then maybe you don’t know enough to even get started at writing an OS. If you don’t know about tools like yacc (yet another compiler compiler) it’s because you have isolated yourself in the ms-centric world. You can "visual" yourself into non-validity with all that stuff.
Update – I just love getting thumbs down when I give an answer like this. I doubt that Kernigan and Ritchie would give my answer a thumbs down.
References :